Features
GSB 18VE2-Li Combi Drill
Extremely powerful: 85Nm for the toughest screwdriving and drilling applications in wood and metal, and impact drilling applications in masonry up to 14mm
Extremely compact: very short head length (only 228mm) for perfect handling
Extremely robust: fully functional, even after falling 2m onto concrete, dues to flexible Dura Shield housing
Electronic Motor Protection (EMP) protects the motor against overload and ensures a long lifetime
13-mm Auto-Lock drill chuck
GDR 18V-LI Impact Driver
Soft rubber gearbox cover to protect materials from damage
White colour LED light for more visibility
High Power (160Nm) generated by newly engineered gear box
Robustness: fully functional after 2m drop test
Electronic Cell Protection: Avoids overload, overheating and deep discharge
GST 18V-Li Jigsaw
Soft grip in all gripping areas for comfortable working
Motor brake allows you to lay the tool down immediately
Plastic base for better gliding and protection of sensitive surfaces
LED light enables a good view at the cut even in dark spaces
Always on Strong Blower function delivers a good view at the cut
GWS 18V-LI Angle Grinder
Bosch Electronic Motor Protection (EMP) protects the motor against overload and ensures a long lifetime.
Bosch Hyper Charge feature charges batteries to 75% after just half of the charge time.
Bullet-Proof Guardstops fragments from being ejected towards the operator.
4 Brush motor, 4-pole high-performance motor has a high thermal capacity and, therefore, a long lifetime.
Bosch Electronic Motor Protection (EMP) protects the motor against overload and ensures a long lifetime.
GKS 18V-LI Circular Saw
Electronic Motor Protection (EMP) and Electronic Cell Protection (ECP) prevent expensive motor burn-out and permanent battery damage due to common place cutting under excessive load.
Handles really well with softgrip on the handle, a comfy and secure two-finger grip trigger.
An aluminium die cast front housing is light but gives you optimum robustness and it also has a guide rail slot.
GLI VariLED Work Light
3 innovative Power LEDs make it one of the most powerful work lights in its class.
Innovatively designed to be compact and easy to use yet extremely robust.
Adjustable light beam (spot or flood) and 9 settable lighting angles
5.0Ah Li-ion batteries and AL 1860 Battery Charger
Innovative COOL pack batteries ensure optimum heat dissipation and therefore increase lifetime by up to 100%.
Battery can be charged regardless of the charging state at any time, without damaging the cells.
No memory effect so the battery can be charged regardless of the charging state at any time.
LBAG+ Tool Bag
Heavy duty tool bag, built to withstand tough work site environments and to protect your Bosch power tools.
Specification
GSB 18VE2-Li Combi Drill
Torque, max. (hard screwdriving applications): 67 Nm
Torque, max. (soft screwdriving applications): 28 Nm
No-load speed (1st gear/2nd gear): 0 - 500 / 1.700 rpm
Max. impact rate: 25.500 bpm
Chuck jaw width: min./max. 1.5 / 13 mm
GDR 18V-LI Impact Driver
Head length: 145mm
No load speed: 0-2800RPM
Impact rate: 0-3200bpm
Torque: 160Nm
Tool size: length 145mm, height 241mm
GST 18V-Li Jigsaw
No Load Speed: 0 - 2,700
Stroke Length: 23mm
Base Plate Bevel: +/- 45°
Chuck Capacity: 13mm
Max Cut (Wood / Aluminium / Steel): 90 / 20 / 8mm
GWS 18V-LI Angle Grinder
Up to 90 cuts per battery charge.
4 Brush motor, 4-pole high-performance motor
Bosch Electronic Motor Protection (EMP)
No load speed 10,000 rpm
Cutting depth 30mm
GKS 18V-LI Circular Saw
Charging time: 30 minutes
Idle Blade Speed: 3900rpm
Blade Side: Left
Bevel capacity: 50mm
GLI VariLED Work Light
Operating time: 150–420 min
Weight (without battery): 0.3kg
Size: Length 130mm, Width 80mm, Height 40mm
Brightness: 300lx
Standard Equipment
GSB18VE2-LI Robust Series Combi Drill
GDR18V-LI Impact Driver
GKS18V-LI Circular Saw
GWS18V-LI Angle Grinder
GST18V-LI Jigsaw
GLI Variled Torch
3 x 5Ah li-ion Batteries Battery Charger
AL 1860 Charger
LBAG+ Tool Bag
Warranty
Click above logo for details and to register your warranty please note to qualify for the 3 year warranty you must register your tool within 4 weeks of purchase date
