Brand Name	Sikkens
Colour	White, Black, Colour
Material	Solvent-borne opaque
Manufacturer Model No	N/A
Wear Type	N/A
Type	Paint
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Applications	Finishing coat: Use on exterior hardwood and softwood joinery as well as suitably primed metals and hard plastics.
Exceptions	Not suitable for use on floors or exterior decking.
Key benefits	Excellent opacity for even coverage, Outstanding colour retention, Easy to apply and achieve an even finish, Quick drying and high scratch resistance
Coverage	16-18 m²/litre
Pack sizes	1, 2.5 and 5 litre cans.
Colour availability	An extensive range of colours from the Colour Concept ranges - follow this link to see the colours <http://sikkens.trade-decorating.co.uk/colours/index.jsp>, plus BS4800, RAL and NCS ranges.

Sikkens Rubbol Satura Plus is a high VOC content mid sheen finish that is suitable for exterior use. Long lasting superb exterior and interior lacquer, easy to apply, perfect flow and scratch resistant. Touch dry in 5 hours and recoatable after 18 hours.

Brand Name	Sikkens
Colour	White
Material	N/A
Manufacturer Model No	AJ6637002N
Wear Type	N/A
Type	Paint
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Size	1L
Application Methods	Brush
Coverage	Up to 16sq/m per litre
VOC level	High
Thinning	Not Recommended
Touch dry	4-8 hours
Recoatable	12-24 hours
Finish	Satin
Cleanup	Brush cleaner or White spirit

Brand Name	Sikkens
Colour	White
Material	Not Applicable
Manufacturer Model No	5074297
Wear Type	Not Applicable
Type	Woodstain
Certifications Met	Not Applicable
Country of Origin	Not Applicable
Protects From	Not Applicable
Waterproof	Not Applicable
Number of Pockets	Not Applicable
Waist Size	ab42ch14gx
Toilet Cistern Capacity	FTW
Size	1 L
Interior or Exterior Use	Both
ERP Rating	Not Applicable
Drying time between coats	18 hrs
Drying Time	5 hrs
Colour Family	Whites
Application Method	Brush

Brand Name	Sikkens
Type	Paint
Product Type	Paint
Short Description	A highly durable,high build,solvent borne opaque that provides a satin paint-like finish
Drying time (recoat)	18 hours
Drying time (touch dry)	5 hours
Suitable Surface	Wood
Coverage	16-18 m²/L
General No. of Coats	2
Application description	Conditions: Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5ºC or above 30ºC during application or drying periods. Protect from frost and rain until dry. Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish. Initial procedure : Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. We do not recommend thinning. Applying the product For best results use a good quality, long-haired, soft bristle brush. Two coats of Rubbol Satura plus should be applied, allowing a minimum of 18 hours drying time between coats. On new work, where practical, the first coat should be applied all round prior to fixing. Pay special attention to any areas of exposed end grain,tops and bottoms of doors, and undersides of cills. The second coat should be applied to all exposed surfaces, as soon as possible after the first coat has dried, but no sooner than 18 hours and within 48 hours, in order to provide full protection. In any event this period should not extend beyond three months,otherwise additional preparation and coating may be necessary. If applied to exterior wood and the contract is of long duration, it is suggested that a further coat be applied prior to hand over to make good any weathering during the construction period. If the second coat is not applied within 48 hours, light sanding with a medium grade abrasive, to provide a surface “key” will be required. Ensure all dust is removed.The product should be applied in a full flowing coat, laying off in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish. Avoid overbrushing, as this will reduce the protection afforded. Apply to a minimum wet film thickness of 60 micrometres
Cleaning	Clean brushes and equipment with brush cleaner immediately after use. If spilled, Rubbol Satura plus may be removed immediately with white spirit while still wet
Storage	Store in cool, dry, frost-free conditions